TOPIC: pmma

NSHL,

We certainly do not mind answering questions, but I would suggest reading through many, many of the posts on the site. There is a lot of information on here and a lot to read about. It will take some time to do so, but you will be more educated about this option. In the end, that will allow you to determine if this is a good option for you.

That being said, most guys find that they require multiple rounds (3 on average) to get to the size and appearance they desire. I have no idea what size gain you are wanting, but most guys seem to require at least 2 to get to the size they desire and then an additional round is often needed or desired to even out any appearance issues they may have.

Like I said, take some time and go through the topics on the forum. Yes, it is a lot to read, but you will be all the better for it.

nshl wrote: So what do you think guys i should do the PMMA or not it is successful or not at leasr from your experience?

Honestly, nobody can tell you to if you should do PMMA or not. It is a personal decision that you have to make for yourself. I can say that out of the choices currently available, PMMA is the one that I chose.

Take your time and do your research. Make sure you are ready before you go through with any option. This includes accepting the possibility that there may be complications or you may come through 100% happy. If you choose PMMA, you should be prepared to do 2 or 3 rounds. This may not be necessary, but you should be prepared for the possibility.

I got PMMA and am very happy with my decision, but I would never tell someone that this is the route that they should take.

Sorry for all the topics but i have to ask a question if the PMMA its such successful threadment why there is no well known clinic or well known doctors or surgens that use this PMMA product inside the usa? This question dosent bugger you guys?

[/QUOTE]

Sorry man like i said before im not from us im from israel and i dont speak or write very well in english because of that im asking everything twise i just want to know details much as possible and i checking with you guys in this forum because im really want to go to doctor c and do the PMMA product sorry for be annoying all im asking is patience ....[/QUOTE]
I understand, but to be fair the questions being asked are questions that were already asked. That is why a lot of members will persist that you read through the reports. I found myself in that same boat. I've only been a member for a short period of time, but have learned a lot. If you need further clarification on something you don't understand feel free to message some of our brothers. They'd be more than happy to help you with any further clarification you might need. Best wishes!

Only Artefill is approved for use in the USA (around 20% PMMA in collagen). I doubt any doctor would put it in the penis. It is definitely not approved for penis augmentation. Also, because the collagen lasts 3 months, it is not a good idea for the penis, which constantly moves. Metacrill and Linneasafe have a filler that only lasts 3 days.

Artefill is $800-$1200 per cc. So, like Briceb said, the cost would be outrageous even if you could find a doctor to do it...and the results might not be that good.

nshl wrote:

briceb wrote:

nshl wrote: So what do you think guys i should do the PMMA or not it is successful or not at leasr from your experience?

Honestly, nobody can tell you to if you should do PMMA or not. It is a personal decision that you have to make for yourself. I can say that out of the choices currently available, PMMA is the one that I chose.

Take your time and do your research. Make sure you are ready before you go through with any option. This includes accepting the possibility that there may be complications or you may come through 100% happy. If you choose PMMA, you should be prepared to do 2 or 3 rounds. This may not be necessary, but you should be prepared for the possibility.

I got PMMA and am very happy with my decision, but I would never tell someone that this is the route that they should take.

why i should prepared for 2 or 3 rounds why 1 round not enough ? You mean because the PMMA can leak from the injection holes?

nshl you need to pay attention to what they are telling you brother otherwise people are not going to want to respond to you. There is always a chance of complication. Even after you have the procedure done and you try your very best with the aftercare, you can still experience dissatisfied results.

It is basically a legal and cost issue in the US. There are patents in place that do not allow for an open market. To use enough of the material that is available in the US would be cost prohibitive.

No, that is not what I mean. There is one company who holds a patent on the use of the product in the US. Because of this, the price is much higher than in another country.

Restoration wrote: Only Artefill is approved for use in the USA (around 20% PMMA in collagen). I doubt any doctor would put it in the penis. It is definitely not approved for penis augmentation. Also, because the collagen lasts 3 months, it is not a good idea for the penis, which constantly moves. Metacrill and Linneasafe have a filler that only lasts 3 days.

Artefill is $800-$1200 per cc. So, like Briceb said, the cost would be outrageous even if you could find a doctor to do it...and the results might not be that good.

So what do you think guys i should do the PMMA or not it is successful or not at leasr from your experience?

briceb wrote: It is basically a legal and cost issue in the US. There are patents in place that do not allow for an open market. To use enough of the material that is available in the US would be cost prohibitive.

So what you mean is that the PMMA is not legal in the us?

briceb wrote:

nshl wrote: So what do you think guys i should do the PMMA or not it is successful or not at leasr from your experience?

Honestly, nobody can tell you to if you should do PMMA or not. It is a personal decision that you have to make for yourself. I can say that out of the choices currently available, PMMA is the one that I chose.

Take your time and do your research. Make sure you are ready before you go through with any option. This includes accepting the possibility that there may be complications or you may come through 100% happy. If you choose PMMA, you should be prepared to do 2 or 3 rounds. This may not be necessary, but you should be prepared for the possibility.

I got PMMA and am very happy with my decision, but I would never tell someone that this is the route that they should take.

why i should prepared for 2 or 3 rounds why 1 round not enough ? You mean because the PMMA can leak from the injection holes?

iron_martian wrote:

nshl wrote:

briceb wrote:

nshl wrote: So what do you think guys i should do the PMMA or not it is successful or not at leasr from your experience?

Honestly, nobody can tell you to if you should do PMMA or not. It is a personal decision that you have to make for yourself. I can say that out of the choices currently available, PMMA is the one that I chose.

Take your time and do your research. Make sure you are ready before you go through with any option. This includes accepting the possibility that there may be complications or you may come through 100% happy. If you choose PMMA, you should be prepared to do 2 or 3 rounds. This may not be necessary, but you should be prepared for the possibility.

I got PMMA and am very happy with my decision, but I would never tell someone that this is the route that they should take.

why i should prepared for 2 or 3 rounds why 1 round not enough ? You mean because the PMMA can leak from the injection holes?

nshl you need to pay attention to what they are telling you brother otherwise people are not going to want to respond to you. There is always a chance of complication. Even after you have the procedure done and you try your very best with the aftercare, you can still experience dissatisfied results.

Sorry man like i said before im not from us im from israel and i dont speak or write very well in english because of that im asking everything twise i just want to know details much as possible and i checking with you guys in this forum because im really want to go to doctor c and do the PMMA product sorry for be annoying all im asking is patience ....

My phone messed up the thread. Sorry buddy. I'm not sure if you can read the comment I left? Anyway as a fellow newbie. I wish you luck and hope that you find the answers you are looking for.