TOPIC: PMMA - The Good, The Bad and The Ugly

HunkChunk wrote: PS. Photos are too large and I will have to post them later, as I get an error message! "An error occured. Error. Storage limit exceeded.

Sorry gentlemen, it will just be a tad bit longer, but rest assured the photo viewing will resume as normal.

This suggestion of using Chinese made stuff is very very serious. I was told by Dr C's office that the New Plastic they used on me (three sessions and I asekd every single time to be sure) was the original stuff, I do hope that we will find out for sure what was being used in the case of Metacrill or NP...

Dr C has a good reputation on this site and he has a lot to gain/loose, so I do hope that one way or another the facts come out to the surface now matter what they are...

How did your third session go?

My life story is similar to your's I'm currently around 4.7 Erect Girth and 5.1 boned pressed Erect length, really considering getting PMMA in the near future

I think Dr C's office realized that most people were complaining about 10% not showing consistently good gains so they went with 20%. The same with the neck entry points, they had problems and now they normally do not do it but it is still an option under certain conditions.

That's what is good about his operations, they listen to customers and try to improve. They still make some mistakes, but at least they try to fix them and improve their procedure.

I have been observing the reports of others who have injected PMMA into their Cock to decided if it is safe enough for my own Cock.

If I don't observe any major complications in other guys for 5 years, would that be sufficient evidence that I should take the dive?